CognitiveTPG A799II Betriebsanweisung PDF herunterladen (Seite 16)

Chapter 3: Setting up the Printer16

A799II Two-Color Thermal Receipt Printer: User Guide A799-2UG0000 Rev. A 09/2013

Mounting the printer on a vertical surface (using optional kit TPG-K260)

1 Select a location that allows adequate support for the printer and is within easy cable length of the host.

2 Follow the instructions provided with wall-mount kit

(K260) to attach the bracket to the vertical surface and

the printer to the bracket.

Caution: Attach the power and communication cables to

the printer prior to attaching the printer to the

bracket.

Note: The “paper low” option will not function when the

printer is vertically mounted.

Installing the optional Spill Guard

The spill guard provides added protection for your printer from moisture or spills.

Power

Supply

Bracket

Ty-Wrap

Cord

Power

Supply

Ty-Wrap

Bracket

Cord

Screws &

Anchors





 

To install the spill guard:

1 Open the printer receipt cover.

2 Align the tabs of the spill guard with the edges of both sides of the receipt cover.

3 Slide the spill guard along the edges and over the receipt cover until it snaps in place.

4 Close the cover. Print a sample to verify spill guard is properly installed.

Caution: Damage to spill guard may occur if removed improperly. Contact tech support for assistance.

Click!

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Keine Kommentare

CognitiveTPG A799II Betriebsanweisung Seite 16