CognitiveTPG A798 Bedienerhandbuch PDF herunterladen (Seite 63)

Chapter 4: Programming Commands 63

Revision C 12/09

A798-PG00001C

Dene downloaded bit image

ASCII GS * n1 n2 d1 ... dn]

Hexadecimal 1D 2A n1 n2 d1 ... dn]

Decimal 29 42 n1 n2 d1 ... dn]

Value of n:

Value of n1 Value of n2 Value of d

1–72 (8 x n1 = number of 1–64 (number of vertical bytes)

Bytes of data (printed down, then across)

horizontal dot columns)

The number of bytes sent is represented by the following formula:

n = 8 x n1 x n2 (n1 x n2 must be less than or equal to 4608).

Enters a downloaded bit image (such as a logo) into RAM or ash with the number of dots specied by n1 and n2. If in

RAM, the downloaded bit image is available until power is turned off, another bit image is dened, or initialize printer (1B

40) command is received. This bit image will be saved as a monochrome logo indexed by current value that was last set by

the select current logo command or 0 is a select current logo command had not yet been given.

See the illustration below for a graphic representation of the downloaded bit image.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 120 121

Keine Kommentare

CognitiveTPG A798 Bedienerhandbuch Seite 63