Cognitivetpg A760 Bedienungsanleitung Seite 67
- Seite / 154
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
A760 User Guide: Programming Supplement
Chapter 4: Programming commands
67
Revision F January 2010
Print downloaded bit image
ASCII GS / m
Hexadecimal 1D 2F m
Decimal 29 47 m
Value and range of m:
This command is used to print a previously stored
monochrome or color logo from printer memory on the
receipt station. The logo is identied as the one indicated
by the most recent select current logo command or 0 if
a select current logo command has not yet been given.
Parameter m is interpreted as follows:
Value of m Print mode Vertical DPI Horizontal DPI
0 Normal 203 203
1 Double-wide 203 101
2 Double-high 101 203
3 Quadruple 101 101
The indexed downloaded bit image from RAM or ash
will be printed on the receipt station at a size specied
by m. If the bit image is a monochrome one, it is printed
in the current color; otherwise it is printed as a two-color
image. If doubling or quadrupling exceeds the print paper
width maximums (576 or 640 with 82.5 mm paper) the
left side of the image is printed and the bits to the right
of the maximum column are discarded. If the available
width is greater than the bit image, its printing will adhere
to any currently set right, left, or center justication. This
command is ignored if the index refers to an undened
logo/ bit image.
Print raster monochrome graphics (ColorPOS
®
)
ASCII GS 0x82 n1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Hexadecimal 1D 82 n1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Decimal 29 130 n1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Value and range of n: n1 to n72/n80 corresponds to one dot row data for a thermal receipt printer.
Each bit denes whether or not a dot of the current color
will be printed. This command is used for printing a
monochrome graphic in real-time. Offsets, page and any
other modes or overlays, including watermark do not
apply and are overridden by this command. A complete
rendering of the intended nal image should have been
done by the application before sending the dot rows.
If two-color paper is indicated by the set paper type
command, then the raster will be printed in the color
that is dened by the set current color command.
- User Guide 1
- Contents 3
- How to use this supplement 9
- Where to find the basics 9
- Revision F January 2010 10
- Startup Diagnostics 11
- Runtime diagnostics 12
- Remote diagnostics 12
- MAIN MENU 13
- Ethernet Terminology 14
- Ethernet Default Setup 15
- Indicators 16
- Overview of commands 17
- Comparison to A756 17
- colorization commands 20
- Character appearance 20
- Print zones 21
- Print zones for slip station 22
- Rotated printing commands 23
- Emulation modes 24
- Commands listed by function 25
- Print and paper feed 26
- Text characteristics 27
- Graphics 28
- Bar codes 29
- MICR check reader commands 30
- Command conventions 32
- Command descriptions 33
- Open form 34
- Perform partial knife cut 34
- Generate tone 34
- Return home 34
- Initialize printer 35
- Set slip paper eject length 35
- This command is ignored 35
- Set slip paper waiting time 37
- Set current color 38
- Select slip station 39
- Select cut mode and cut paper 39
- Set paper type (ColorPOS 40
- Print test form 41
- Feed n dot rows 43
- Add n extra dot rows 43
- Print and feed paper 44
- Print and reverse feed paper 44
- Print and feed n lines 44
- Reverse feed n lines 45
- Reverse feed n dots 45
- Horizontal tab 46
- Set column 46
- Set vertical line spacing 47
- Set horizontal tab positions 48
- Set relative print position 49
- To move to the left: 49
- Select justification 50
- Set left margin 50
- Set printing area width 51
- Text characteristics commands 52
- Select print mode 53
- 55
- Cancel user-defined character 56
- Select double-strike 56
- Cancel double-strike 57
- Select or cancel italic print 57
- Select character code table 58
- Select character size 59
- Select bit image mode 63
- Define downloaded bit image 66
- Print downloaded bit image 67
- Download logo image (ColorPOS 69
- Color shade mode (ColorPOS 71
- Set LogoEZ 75
- colorization 75
- attribute mapping 78
- Enable constant speed logos 80
- Status command introduction 81
- Batch mode 81
- Transmit paper sensor status 83
- Transmit printer ID 84
- Transmit status 88
- Send printer software version 89
- Real-time commands 90
- Real-time status transmission 92
- Real-time request to printer 94
- Real-time commands disable 95
- Unsolicited status mode 96
- Print bar code 100
- 29 107 n d1... 00 103
- Select PDF 417 parameters 104
- Sample symbol description: 105
- Select bar code width 105
- Page mode 106
- Select page mode 107
- Select standard mode 108
- Set print area in page mode 109
- Execute macro 111
- MICR commands 112
- MICR parsing 112
- Continued 114
- Sample parsing formats 116
- Check serial number 118
- Loading the exception table 119
- Exception table entry format 119
- Example 1 119
- Example 2 119
- Check flip commands 120
- User data storage 122
- Erase user flash sector 124
- User storage status (ColorPOS 125
- Flash download 126
- Get firmware CRC 127
- Return microprocessor CRC 128
- Return main program flash CRC 128
- Erase selected flash sector 128
- Definition 130
- Ethernet setup commands 131
- Setting raw TCPIP port 9001 132
- LP Daemon 132
- Telnet Daemon 132
- DHCP (auto-configuration) 132
- Inactivity timeout 133
- Keep alive pings 133
- Appendix A: 134
- Appendix B: 142
- Resident Character Sets 142
- Code page 737 (Greek) 143
- Code page 850 (Multilingual) 144
- Code page 852 (Slavic) 145
- Code page 857 (Turkish) 146
- Code page 860 (Portuguese) 148
- Code page 862 (Hebrew) 149
- Code page 865 (Nordic) 151
- Code page 866 (Cyrillic) 152
Verwandte Produkte und Handbücher für Drucker Cognitivetpg A760
Drucker Cognitivetpg B780 Bedienungsanleitung
(52 Seiten)
(52 Seiten)
Drucker Cognitivetpg B780 Bedienungsanleitung
(192 Seiten)
(192 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(8 Seiten)
(8 Seiten)
Drucker Cognitivetpg DLXi Bedienungsanleitung
(326 Seiten)
(326 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(90 Seiten)
(90 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(90 Seiten)
(90 Seiten)
Drucker Cognitivetpg DLXi Bedienungsanleitung
(27 Seiten)
(27 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(90 Seiten)
(90 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(90 Seiten)
(90 Seiten)
Drucker Cognitivetpg CRx Bedienungsanleitung
(92 Seiten)
(92 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.864 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern